XNA Creators Club Online
Page 1 of 1 (2 items)
Sort Posts: Previous Next

XAUDIO problem and EVGA Nforce 780i SLI board

Last post 3/3/2009 12:30 PM by GilesGoat. 1 replies.
  • 2/28/2009 10:29 AM

    XAUDIO problem and EVGA Nforce 780i SLI board

    Hi guys,

    I don't have much info about this problem except that appearently Initialiseengine() fails.

    Suffice I say we are going to publish a game by "an important distributor" and they are trying it on such a board and it seemes something is not working with that kind of board.

    I heard rumours around ( that I'd like to verify ) about the fact that XAUDIO2 has "some problems" with sound cards with 7.1 audio.

    I don't know anything else much about this particular problem/hw, the motherboard in case is this one :

    Link to the motherboard specs.

    Any help appreciated, unfortunately so far I don't have much more info about the problem.

    [edit] - I found this additional extra info searching around :

    The audio section from this motherboard provides 7.1 audio, produced
    by the south bridge chip with the aid of a Realtek ALC888 codec, which
     provides a 90 dB signal-to-noise ratio for its inputs and a 97 dB SNR for
    its outputs and a maximum sampling rate of 96 KHz for its inputs and 192 KHz
     for its outputs. For a high-end motherboard we expected a better codec to be used.


    Anyone knows if this codec/stuff has problems with XAUDIO2 then ?
  • 3/3/2009 12:30 PM In reply to

    Re: XAUDIO problem and EVGA Nforce 780i SLI board

    Hi guys.

    Had to say "this problem got solved by its own".

    I just received this email :


    Hi Ivan,

    It actually seems like my download off the ftp was corrupted. It seems to be working correctly now.

    So after all looks like it wasn't a problem at all :)

Page 1 of 1 (2 items) Previous Next